Womic Steelhe mea hana nui a me ka mea hoʻopuka honua oʻO ISO 3183 L360NE paipu kila ʻole, e hoʻolako ana i nā paipu laina laina kalapona kiʻekiʻe no ke kinoea maoli a me nā ʻōnaehana pipeline. Hana ʻia kā mākou huahana i ka hoʻokō piha ʻana me ka paʻi hou loa oISO 3183(ʻOihana ʻaila a me nā kinoea maoli - Paipu kila no nā ʻōnaehana halihali pipeline), ma lalo o kaL360NEpapa - he paipu laina maʻamau, paʻakikī kiʻekiʻe.
1. Nānā Kūlana & Huahana
Inoa Huahana: ʻO ISO 3183 L360NE Paipu kila ʻole (SMLS)
Kūlana: ISO 3183:2019
Papa: L360NE
Hōʻike ka "L360" i ka ikaika haʻahaʻa haʻahaʻa o 360 MPa
Hōʻike ka "N".Hana maʻamaukūlana hāʻawi
Pono ʻo "E" i ka paʻakikī a me ka hoʻokō piha ʻana i ka pae PSL2
Nā paipu ISO 3183 L360NE SMLShoʻohana nui ʻia i nā paipu kinoea kūlohelohe lōʻihi, ka lawe ʻana i ka aila a me ke kinoea, ka paipu hoʻoheheʻe ʻana, a me nā ʻōnaehana hoʻoiho kiʻekiʻe, ʻoi aku hoʻi i nā wahi haʻahaʻa haʻahaʻa e koi ana i ke kūpaʻa hopena kiʻekiʻe.
2. Nā mea kiko'ī huahana
Anawaena waho: 21.3 mm (1/2") a i 610 mm (24")
Mānoanoa Pā: 3.2 mm a 50 mm
Ka lōʻihi: A hiki i 12.5 mika (Paʻa, SRL, DRL)
Hoʻopau: ʻO ka Plain End (PE), Beveled End (BE), Threaded + Coupling ma ke noi
Kūlana ʻili: ʻEleʻele (ʻeleʻele), i uhi ʻia i ka Varnish, a i ʻole me ka uhi anti-corrosion
ʻAno Paipu: Seamless (SMLS) wale no keia papa
3. Hoʻohui Kemika (Nā Waiwai Maʻamau - wt%)
| ʻElemu | Maʻiʻo Max (%) |
| Kalapona (C) | ≤ 0.18 |
| Manganese (Mn) | 1.20 – 1.60 |
| ʻOka (P) | ≤ 0.020 |
| Sulfur (S) | ≤ 0.010 |
| Silika (Si) | ≤ 0.45 |
| Niobium (Nb) | ≤ 0.05 |
| Vanadium (V) | ≤ 0.10 |
| Titanium (Ti) | ≤ 0.04 |
| Kaulike Kalapona (CEIIW) | ≤ 0.43 |
Hoʻopili nā mea kemika āpau i nā koi ISO 3183 PSL2 a mālama pono ʻia e hōʻoia i ka weldability like ʻole, ka paʻakikī, a me ka pale ʻana i ka corrosion.
4. Pono Mechanical
Ka ikaika hua (ReH): ≥ 360 MPa (maʻamau 370–450 MPa)
Ikaika U'i (Rm): 460–760 MPa
Elongation (A5): ≥ 22%
Paʻakiki (HV10): ≤ 250
Nā ho'āʻo palahalaha / piko: Pono a hana ʻia e like me ke kūlana
5. Nā Koina Paʻakikī Paʻi
Pono ʻia ʻo L360NE no ka hoʻokō ʻana i ka hana ikaika haʻahaʻa haʻahaʻa:
Ho'āʻo Charpy V-Notch: 27J ka palena iki ma -40°C
Wahi Hoao: Metala kumu, metala weld, a me HAZ (inā pili)
Laʻana pinepine: Hoʻokahi hoʻonohonoho no ka ʻāpana hoʻāʻo e like me ISO 3183 PSL2
Hoao Hoao: ʻO ka lōʻihi a i ʻole ka transverse ma muli o OD
6. Hoomaemae Wela
ʻO nā mea a pauʻO ISO 3183 L360NE paipu ʻoleua hoolakoia maHana maʻamau (N)kūlana:
ʻO ka mahana maʻamau: 870-950 ° C
ʻO ka hoʻoheheʻe ʻana i ka umu ahi e hoʻokō ai i ka hoʻolālā maikaʻi a me nā ʻano mīkini like ʻole
Mālama ʻia nā moʻolelo lapaʻau wela me ka traceability piha.
7. Ka hoʻomanawanui ana (e like me kaISO 3183)
●OD Hoomanawanui: ± 0.75% (min ± 0.5 mm)
●Mānoanoa Pā: -12.5% / +15%
●Hoʻomanawanui lōʻihi: -0 / +100 mm
●Pololei: 0.2% o ka loaʻa ʻana o ka lōʻihi max deviation
●Hoʻopau Squareness: ≤ 1.5 mm kaawale
8. ʻO ka hoʻāʻo ʻole a me ka luku ʻole
Hoʻokomo ʻia nā paipu āpau i ka 100% pono a koho ʻia:
●Hoʻāʻo Hydrostatic: Ua hoʻāʻo ʻia kēlā me kēia paipu ma ≥ 95% SMYS
●Ka ho'āʻo ultrasonic: UT kino piha no ka lamination a me nā hemahema lōʻihi
●Eddy i kēia manawa(koho): No nā hemahema ili
●Nānā Kiʻi & Nānā: 100%
●Hoʻopololei / Piʻo / Drift
●ʻIke Metallographic a me ka hoʻomalu ʻana i ka nui o ka palaoa
●Microstructure Etching no ka ʻike ʻana i ka Banding(koho)
9. Nā palapala hōʻoia a me nā palapala
Mālama ʻo Womic Steel i ka hoʻokō ʻana i nā palapala hōʻoia nui:
●ISO 9001:2015 - Pūnaehana hoʻokele maikaʻi
●ISO 14001:2015 – Hoʻokō Kaiapuni
●ISO 45001:2018 – Ke Ola Ola a me ka Palekana
●EN 10204 3.2Loaʻa ka palapala hōʻoia ma ke noi
●Nānā ʻaoʻao ʻekolu: SGS, BV, DNV, TÜV, Kakau inoa o Lloyd
●Hāʻawi ʻia nā hōʻike hoʻāʻo: ʻIkepili kemika, hoʻāʻo mīkini, nā hopena NDT, nā lāʻau lapaʻau wela, a me nā palapala traceability piha
10. Nā noi
ʻO nā paipu hoʻouna ʻaila a me ke kinoea kiʻekiʻe
ʻO ka ʻohi kinoea a me ka hoʻolaha pūnaewele
ʻO nā mea hoʻoheheʻe a me nā mea kanu LNG
Nā mea hoʻonoho paipu ma kahakai a me waho
ʻO nā paipu slurry a me nā paipu kaʻina hana ʻoihana
11. Hoʻokalakupua Hana & Lead Time
Manawa alakaʻi maʻamau:20-35 mau lā hana
Kākoʻo ʻia nā papahana wikiwiki me ka holo wikiwiki ʻana a me ka hoʻouna ʻana
ʻO nā mea waiwai i hoʻopaʻa mua ʻia mai nā mea hoʻolako i hōʻoia ʻia (Baowu, Valin, etc.)
Hua mahina:5,000+ tona o nā paipu SMLS
12. Packaging & Marking
Hoailona: ʻO ka inkjet a i ʻole ka hoʻopaʻa paʻa paʻa ka nui, spec, wela no., batch no., Womic logo, lā hana.
Hoʻopau Palekana: Nā pāpale plastik a i ʻole nā mea pale bevel
Hoʻopili ʻia: Nā pūʻolo hexagonal me nā kaula kila, ʻoi aku ka nui o 2.5 tons no ka pūʻolo
ʻOkaʻi ʻana: Pepa waiʻole + HDPE + kāʻei kila no ka hoʻouna ʻana i ke kai lōʻihi
Hoʻopaʻa inoa: Nā lepili ID barcoded no ka hiki ke kikohoʻe
13. Palekana 'ili a me ka uhi
Hāʻawi ʻo Womic Steel i nā koho lapaʻau waho waho:
●Ka uhi ʻana o Antirust: Lacquer ʻeleʻele, kiʻiʻoniʻoni ʻaila māmā, a i ʻole maloʻo mua i puhi ʻia
●3LPE/3LPP/2FBE ka uhi: Koho no ka ISO 21809 no ka paipu kuʻi ʻino
●Ka uhi Kuloko: Epoxy a i ʻole ka pahū sima no ke kahe wai/ʻaila
●Paʻa ʻana: Sa 2.5 hoʻopau no ka hoʻohana ʻana i waho / kai
14. No ke aha e koho ai i ke kila Womic
●Hoʻopiha piha i ka ISO 3183, EN, a me nā kikoʻī o ka papahana
●ʻO nā laina ʻōwili SMLS kiʻekiʻe me nā hiki ke mālama wela piha
●NDT i loko o ka hale a me nā keʻena hoʻāʻo luku
●Hōʻoiaʻiʻo ʻia ka manawa alakaʻi a me ka wili
●Nā laina pani a me ka hale kūʻai beveling no ka lawelawe turnkey
●ʻIke holo honua holoʻokoʻa80+ ʻāina
E koho iā Womic Steel Group ma ke ʻano he hoa hilinaʻiNā Paʻi kila, nā kila kilaa me ka hāʻawi ʻole ʻana i ka hoʻokō. Welcome Inquiry!
Pūnaewele: www.womicsteel.com
leka uila: sales@womicsteel.com
Tel/WhatsApp/WeChat: Victor: +86-15575100681 a i ʻole Jack: +86-18390957568
E koho iā Womic Steel Group ma ke ʻano he hoa hilinaʻiʻO nā paipu kila SMLS, nā mea ponoa me ka hāʻawi ʻole ʻana i ka hoʻokō. Welcome Inquiry!
Pūnaewele: www.womicsteel.com
leka uila: sales@womicsteel.com
Tel/WhatsApp/WeChat: Victor: +86-15575100681 a i ʻole Jack: +86-18390957568
Ka manawa hoʻouna: Apr-17-2025